CINT=CINT_0, RTE=RTE_0, BRR=BRR_0, DINT=DINT_0, DMAE=DMAE_0, BGE=BGE_0, DCE=DCE_0, CRM=CRM_0, CTOE=CTOE_0, DTOE=DTOE_0, CC=CC_0, DEBE=DEBE_0, CIE=CIE_0, CEBE=CEBE_0, CINS=CINS_0, CCE=CCE_0, AC12E=AC12E_0, BWR=BWR_0, TC=TC_0
Interrupt Status
| CC | Command Complete 0 (CC_0): Command not complete 1 (CC_1): Command complete |
| TC | Transfer Complete 0 (TC_0): Transfer not complete 1 (TC_1): Transfer complete |
| BGE | Block Gap Event 0 (BGE_0): No block gap event 1 (BGE_1): Transaction stopped at block gap |
| DINT | DMA Interrupt 0 (DINT_0): No DMA Interrupt 1 (DINT_1): DMA Interrupt is generated |
| BWR | Buffer Write Ready 0 (BWR_0): Not ready to write buffer 1 (BWR_1): Ready to write buffer: |
| BRR | Buffer Read Ready 0 (BRR_0): Not ready to read buffer 1 (BRR_1): Ready to read buffer |
| CINS | Card Insertion 0 (CINS_0): Card state unstable or removed 1 (CINS_1): Card inserted |
| CRM | Card Removal 0 (CRM_0): Card state unstable or inserted 1 (CRM_1): Card removed |
| CINT | Card Interrupt 0 (CINT_0): No Card Interrupt 1 (CINT_1): Generate Card Interrupt |
| RTE | Re-Tuning Event: (only for SD3.0 SDR104 mode and EMMC HS200 mode) 0 (RTE_0): Re-Tuning is not required 1 (RTE_1): Re-Tuning should be performed |
| TP | Tuning Pass:(only for SD3.0 SDR104 mode and EMMC HS200 mode) |
| CTOE | Command Timeout Error 0 (CTOE_0): No Error 1 (CTOE_1): Time out |
| CCE | Command CRC Error 0 (CCE_0): No Error 1 (CCE_1): CRC Error Generated. |
| CEBE | Command End Bit Error 0 (CEBE_0): No Error 1 (CEBE_1): End Bit Error Generated |
| CIE | Command Index Error 0 (CIE_0): No Error 1 (CIE_1): Error |
| DTOE | Data Timeout Error 0 (DTOE_0): No Error 1 (DTOE_1): Time out |
| DCE | Data CRC Error 0 (DCE_0): No Error 1 (DCE_1): Error |
| DEBE | Data End Bit Error 0 (DEBE_0): No Error 1 (DEBE_1): Error |
| AC12E | Auto CMD12 Error 0 (AC12E_0): No Error 1 (AC12E_1): Error |
| TNE | Tuning Error: (only for SD3.0 SDR104 mode and EMMC HS200 mode) |
| DMAE | DMA Error 0 (DMAE_0): No Error 1 (DMAE_1): Error |